Can we use simple paint to paint furniture?

If you have a question can we use simple paint to paint furniture, The answer is yes, but before you can paint wooden furniture with acrylic, you’ll need to remove the finish, which is typically glossy?

The surface must be cleaned and sanded before painting. If you’re going to use simple paint to paint furniture, go for a satin or semigloss finish in either latex or oil.

You should never let primer show through. Applying a latex primer before applying latex paint is a great idea for most cases.

This is a helpful post for new painters, so let’s find out how to apply a single coat of paint in a few straightforward steps.

The Necessary steps for simple paint to paint furniture

The Necessary steps for simple paint to paint furniture

Let’s talk about it in detail…

Step 01: PREPARE

If an item has been sitting in a dusty garage or storage room for a while, the first thing I do before painting it is to give it a deep clean. Murphy’s Oil Soap does a great job and is safe to use on furniture.

Take out the drawers before you paint, so you can do it without putting paint on anything else.

Step 02: SANDING

The next step is to sand your furniture to remove any shiny coatings and create a good “grip” for the paint. We suggest using sandpaper with a medium grain.

In between coats of paint, I sand with very fine grit. Unlike when applying stain, paint does not require removing the old finish or sanding the surface to natural wood.

Taking off the shiny coating is all that’s needed. You can skip this step if the surface is already dull.


Apply some primer to your furniture after you have verified that it is clean, dust-free, and completely dry.

Your paint will stick to the piece more properly, and any stains or dark spots in the wood will be covered as a result of this step.


Next, sand once more! Lightly sand your item with fine-grit sandpaper between each coat of paint. In the end, you’ll have something that looks much more polished and regular thanks to this.

Always use a tack cloth to get clear of the sanding dust.

STEP 05: Putting on the Finish Coat

You can start painting now that your panel is prepared. I usually use interior latex paint in a semi-gloss sheen when painting furniture.

Apply paint lightly, and I’ll say it again: sand in between coats! If you want a smooth final product, this is an important step. In general, I’ll apply three coats of paint.

Now, there are multiple techniques for painting. You can use a paint sprayer, normal spray paint (just pick a good brand!), a brush, a roller, or any combination of the three.

I often paint the hidden areas first with a little foam roller and then go on to the more visible areas with a brush. Brush strokes are less visible when using the roller.

STEP 06: Safety measure

Wait at least 24 hours after applying the last coat of paint before protecting the surface. (Likewise, you can just let it alone for 30 days to repair.

The finish on your furniture will last longer if you seal it, and it will be much easier to keep after because of this.

You should not use varnish to seal your paint if you are using white or any very color of paint since it will yellow with time.

It should work OK on any other color of paint, but if you ask me, the best topcoat is a water-based one, like Minwax Polycrylic.

Another option that works well on any color, including white, is furniture wax, which leaves no trace and is simple to clean up.

You may attain the desired level of shine by applying Minwax Finishing Wax, letting it dry for 10 to 15 minutes (I use cheesecloth for application), and then polishing it with a clean cloth.

Give your furniture a day or two to cure after painting it.

Can you select a paint which would work for painting my furniture?

Different types of paint, such as oil, latex, and acrylic, as well as chalky and milk-based specialty paints, can be used to give the furniture a new look.

You can use a roller, a brush, or even spray paint to do the job.

If you want to simple paint to paint furniture, what do you suggest?

Most furniture looks best when painted in a satin or semigloss texture.

A variety of sheens, from flat (matte) to creamy to satin to semi-gloss to high-gloss, are available for both interior and exterior paint.


Conclusion for use simple paint to paint furniture

The purpose of this guide was to inspire creativity. Any piece of wood furniture, either new or old, can be refreshed with a coat of paint.

If you follow these instructions, you can use easily simple paint to paint furniture. We pray that it has been successful.

About Me

Here is Kiran Shazadi Furniture and Wooden Expert, with expertise in Home Decoration.

Leave a Comment